2,000 HP AC Drilling – Motor HAW29BC200
HAW29: Benchmark Performance for Oil & Gas Applications
The Houma Armature 2,000 HP HAW29 (HAW29BC200) AC Motor is designed to deliver or exceed customer specifications for performance, productivity, and durability. Engineered to withstand decades of continuous service, the rugged HAW29, 2,000 HP motor is ideally suited for mud pumps and draw works in extreme environments where oil and gas rigs operate either on or off-shore.
HAW29 Standard Features
- 6 pole stator with form wound windings
- Extra cough pitch copper rotor bars
- Certified Class H insulation
- Robotically caped Mica-Kapcon
- Fully vacuum impregnated (VPI)
- Right or left blower and junction box positions
- Designed for Variable Frequency Drive operation
- Heater
- Double shaft extension (capered, splined or keyed)
- ATEX and CSA-approved
HAW29 Optional Features
- Encoder
- Bearing RTD
- Blower assembly
- Air pressure switch
- IP 56 junction box
- IP 44 motor enclosure, ABS and DNV
Critical Data
| Model number | HAW29BC200 |
|---|---|
| Voltage (AC) | 575 ±10% *** |
| Current (Amps) | 1775 |
| Rated Speed | 982 RPM |
| Torque (lb ft) | 10,700 at rated speed |
| HP at rated speed | 2000 at rated speed |
| Max. permissible speed | 3000 RPM** |
| Base motor weight Rotor weight | 7500 lbs.
2250lbs |
| Recommended blower CFM | 3250 |
| Nominal resistance / phase @ 25˚C | 0.0037 Ω |
| Rotor balance | 50 gram inches |
| Standard bearing grease | Mobil Unirex EP 2 |
| Megger resistance | 20 MΩ |
