800 Form HP Wound AC Drilling Motor — HAW 13BC080
High Power Density Technology Up To 800 HP in a Standard 600 HP Frame
Drill deeper, faster, and more efficiently with the HAW13 High Power Density motor from Houma Armature Works. Utilizing proprietary intra-slot cooling technologies, the HAW13 delivers up to 33% more horsepower and torque than similar motors and will withstand rigorous high shock and vibration conditions for decades of continuous service in harsh environments.
Standard Features
- 4-pole stator with form wound windings
- Certified Class H insulation
- Copper rotor bars
- 2-cycle global VPI
- Constructed with nodular cast iron
- Designed for Variable Frequency Drive (VFD) » ABS certification operation
- Heaters — 1 each end
- IP 23 motor enclosure
- Shaft seals and oil slingers on the drive a Blower assembly and non-drive sides
- Six (6) 100 platinum RTDs; 2/phase embedded in stator
- ISO 9001:2015-certified
Optional Features
- Encoder
- Bearing RTD
- Blower assembly
- Air pressure switch
- IP 56 junction box
- ABS certification
Critical Data
Model number | HAW13BC080 |
---|---|
Voltage (AC) | 592 |
Current (Amps) | 686 |
Rated Speed | 1181 RPM |
Torque (lb ft) | 3560 at rated speed HP 800 at rated speed |
HP | 1150 at rated speed |
Max. permissible speed |
2400 RPM |
Base motor weight Rotor weight | 3900 Ib. Est. |
Recommended blower CFM | 3,100 |
Rotor balance | 50 gram inches |
Standard bearing grease | UNIREXEP2 |